DWC double wall corrugated pipe extruding machine supplier in China
application of double wall corrugated pipe machine
PVC PE double wall corrugated pipe machine/extrusion line adopts extruding and forming process, has the features of reliable quality and high efficiency. Compared with other plastic pipe wall structure, double wall corrugated pipe has excellent wall structure design, its low weight reach the lower production cost and improve the market competitiveness. It is widely used in various field instead of concrete pipe and iron pipes, because it has excellent features such as: easy connected and accessories installed, and quality reliable
advantage of our double wall corrugated pipe machine
1.
The main machine adopts special designed high efficiency screw which is specially used for polyolefin, it has the features of stable performance and high efficiency. The machine has two independent extruders, which can realize both inside and outside layer with different material and colors
2. Composite extrusion die head with specially helical structure to make the wall thickness uniform and stable production
3. The forming machine has automatic power-off protection deivce. The forming machine can automatically exit from the die head to avoid equipment failure in case of electricity cut off suddenly. It also equipped with new type high transmitting ratio reducer, easy to operate and maintenance
4. The corrugated forming system is in combination with water cooling and air cooling to ensure high production speed continuously. Advanced programmable lubricating system minimizes the moulds wear so as to increase the life of service and ensure work smoothly with high precision to ensure the products quality stability.
5. Mould adopts special aluminum alloy material and high precision die casting forming mould method, it has the advantages of high precision, high strength, good wearability and better heat dissipation performance
6. Wave structure launched a comprehensive new optimization design to reach the best combination of high-rigidity and low weight
|
machine model
|
SBG250
|
SBG110
|
SBG160
|
PVC-SBG250 |
|
pipe diameter mm
|
75-250
|
40-110
|
50-160
|
75-250 |
extruder screw | single | single | single | double |
|
extruder model
|
SJ90/30+SJ75/30
|
SJ65/33+SJ65/30
|
SJ75/30+SJ65/30
|
SJ65/132 |
|
mould block pairs
|
48
|
72
|
72
|
48 |
mould block material | Aluminum | iron | iron | aluminum |
SJ65/33+SJ65/30 extruder
SJ65/33 single screw extruder 45kw motor
150kg output
PLC optional
SJ65/33+SJ65/30 extruder
SJ65/30 single screw extruder30kw motor
120kg output
with auto loader and hopper dryer device
connical double screw extruder
if the raw material is pvc powderthe extruder shall be connical double screw
hot and cold mixer for pvc double wall corrugated pipe
the mixer used to mix pvc powder, caco3 and chemical together
die head
40 Cr materialstainless steel heater
mode: co extrusion
air blowing and water cooling
mould and forming machine
mould material: 45 steelmould pairs 72
vacuum chanel on mould on mould
mould size: 65.94mm length, 110mm width, 200mm weight
mould and forming machine
forming type: vacuum and air blowing
cooling methods: by air cooling zone: 8
motor 4kw
vacuum pump 5.5kw
mould plate cooling: by water
haul off machine
haul off machine is optional
cutting machine
PLC cutter 1.5kw motor
equip dust collection device
equip meter counting device
product stacker
6000mm lendghstainless steel material
winder/coiler
single position outer diameter 800-1200mm adjustable
inner diameter 550-800 adjustable
we have other types double wall corrugated pipe machine
75-250mm HDPE double wall corrugated pipe machine
48 pairs mould block mould material is Aluminum. Adopt good mechnical properites cast aluminum alloy and process high faigue strength and good asbrasion resistance
75-250mm pvc double wall corrugated pipe machine
we can provide turnkey project
1, we will provide not only machines but also raw material to produce final product
2, we will provide design for factory layout and electrical power accounting
3, we will provide the model selection and technicial parameters
4. we will provide spare parts according to customer request
5, we will provide good service for machine installation and trainning.
6, we will provide after-sell service for whole life of machine.
7. we will provice solution for the practical problem during production
machine installation and training service
When our corrugated pipe machine arrives to Customer's factory, we shall help customer to prepare the material,electricity and other running conditions.
then we will send our engineers to customer's factory for installation all the machines and running all the machines.
our engineer shall also teach customer's engineer how to operate machine.
After that if the customer's engineer has any problem in the cooperation, they can contact our service team to do online training.
our customers from all over the world: Turkey,Yemen,Malaysia,Ecuador,Benin,Ukraine,Uzbekistan,Brazil,Bahrain,Pakistan,Qatar,Belarus,India,Indonesia,Iraq,Iran,Jordan,Liberia,Saudi Arabia, Algeria,Argentina, Oman,Kenya,Romania,Poland,Bangladesh,South Africa,Kazakhstan,Kuwait,Great Britain,Zambia, Morocoo,Mexico,Chile,Russia,Syria,America,Tunisia,Egypt,Thailand,Colombia,Peru,Philippines,Vietnam,Cameroon and so on
SJ65/33+SJ65/30 extruderSJ65/33 single screw extruder45kw motor150kg outputPLC optional
SJ65/33+SJ65/30 extruderSJ65/30 single screw extruder30kw motor120kg outputwith auto loader and hopper dryer device
connical double screw extruderif the raw material is pvc powderthe extruder shall be connical double screw
hot and cold mixer for pvc double wall corrugated pipethe mixer used to mix pvc powder, caco3 and chemical together
die head40 Cr materialstainless steel heater
die headmode: co extrusionair blowing and water cooling
mould and forming machinemould material: 45 steelmould pairs 72vacuum chanel on mould on mouldmould size: 65.94mm length, 110mm width, 200mm weight
mould and forming machineforming type: vacuum and air blowingcooling methods: by aircooling zone: 8motor 4kwvacuum pump 5.5kwmould plate cooling: by water
haul off machinehaul off machine is optional
cutting machinePLC cutter1.5kw motorequip dust collection deviceequip meter counting device
product stacker6000mm lendghstainless steel material
winder/coilersingle positionouter diameter 800-1200mm adjustableinner diameter 550-800 adjustableproduct photo
we have other types double wall corrugated pipe machine75-250mm HDPE double wall corrugated pipe machine48 pairs mould blockmould material is Aluminum. Adopt good mechnical properites cast aluminum alloy and process high faigue strength and good asbrasion resistance
75-250mm pvc double wall corrugated pipe machine
we can provide turnkey project
our advantage
Please send your message to us
